Sivers Semiconductors announced receiving first-year funding of $5.6 million from the Northeast Microelectronics Coalition (NEMC) Hub through U.S. CHIPS and Science Act under the Microelectronics Commons program to develop full-duplex arrays for EW.
The compact Ophelia-III radio module is offered as part of Würth Elektronik’s “Build Your Own Firmware” concept.
Spectrum Control introduces OptoXtreme™ 16010 quad 10G multi-mode optical wavelength (850 nm) transceiver that effectively addresses the high speed requirements of emerging defense systems.
This article discusses Revision 3 of UNECE Regulation No. 100, which introduces new safety requirements for rechargeable energy storage systems in electric vehicles, including updated tests and standards for battery packs and thermal propagation protection.
The post Testing to UNECE Regulation 100 Requirements for Electric Vehicle Batteries appeared first on In Compliance Magazine.
This article discusses the ongoing revision of IEEE Standard 1720, which provides recommended practices for near-field antenna measurements. It outlines the update process, key changes in various clauses, and new additions to the standard, including improved guidance on anechoic chamber design and non-regular scanning techniques. The revised standard is expected to be published in early 2025.
The post Update on the Revision of IEEE Std 1720™ appeared first on In Compliance Magazine.
This article discusses improving automotive electronics development processes, emphasizing early testing and in-house EMC capabilities. It highlights current limitations, suggests efficiency enhancements, and provides practical advice for implementing cost-effective EMC testing setups, drawing on the author's extensive industry experience.
The post Evaluation of Automotive Electronics Product Development Process and Implementation of In-House EMC Development Testing Facility appeared first on In Compliance Magazine.
This article discusses two of four circuit models for transmission lines in sinusoidal steady state. Model 1 is used for solving equations, while Model 2 introduces standing waves. The author explains their applications and differences.
The post Analysis of Transmission Lines in Sinusoidal Steady State appeared first on In Compliance Magazine.
This text discusses ESD/ESA control in semiconductor fabs, highlighting challenges with S20.20 certification, the importance of grounding conductive materials, managing insulative materials, and using ionization for charge neutralization in wafer manufacturing processes.
The post Are ESD & ESA Controls in place in Semiconductor Wafer Fabs? appeared first on In Compliance Magazine.
This column discusses "wordless" safety labels, which use symbols and hazard severity panels without text. It explores their benefits, limitations, and implementation considerations, emphasizing the importance of balancing complete information with clear communication in product safety warnings.
The post Implementing “Wordless” Safety Labels appeared first on In Compliance Magazine.
The mobile communications industry has been provided with new guidance on the building blocks needed for autonomous networks that encompass AI thanks to the publication of NGMN’s “Automation and Autonomous system Architecture Framework – Phase 2.”
Just as interference testing requires RF enclosures, isolation systems in turn need their own testing. This document reviews some of the issues and considerations in testing RF enclosures.
The post Shielding Effectiveness Test Guide appeared first on In Compliance Magazine.
KRYTAR, Inc. announces two new directional couplers operating in the wideband frequency range of 1.7 to 20.0 GHz (L- through K-Bands) offering nominal coupling of 20 dB and 30 dB.
Raytheon has received a $525 million contract from the U.S. Navy to produce ESSM Block 2 missiles and spares for the U.S. and allied nations.
Epirus announced the introduction of Leonidas Expeditionary, developed as part of a $5.5 million contract award from the U.S. Navy’s Office of Naval Research (ONR).
