Don MacArthur's blog outlines key steps to excel in compliance engineering, including mastering regulations, staying updated, gaining experience, developing problem-solving skills, and maintaining ethical conduct. He emphasizes continuous learning and effective communication across teams.

The post Practical Engineering: How to Become a Great Compliance Engineering Professional appeared first on In Compliance Magazine.

The FDA released draft guidance on chemical analysis for medical device biocompatibility assessment. This approach can reduce testing time and animal testing. Public comments are accepted until November 19th through the Federal Rulemaking Portal.

The post FDA Drafts Guidance on Chemical Analysis for Medical Device Biocompatibility appeared first on In Compliance Magazine.

The FCC ordered a Massachusetts resident to stop using a 2002 HDTV antenna that was interfering with state police communications. The interference ceased when the antenna was unplugged.

The post FCC Issues Harmful Radio Interference Notification appeared first on In Compliance Magazine.

Don MacArthur explains spectrum analyzers, tools for frequency domain analysis of signals. He covers their functionality, key parameters (center/span, reference level, RBW, VBW), types, and usage. MacArthur emphasizes their importance in electronic measurements and provides tips for preventing damage to the devices. 

The post Spectrum Analyzer Measurements appeared first on In Compliance Magazine.

A comprehensive review conducted by the World Health Organization (WHO) has determined that there is no increased risk of brain cancer associated with mobile phones.

The post Mobile Phones Not Linked to Brain Cancer, Researchers Find appeared first on In Compliance Magazine.

To help facilitate the safe operation of uncrewed aircraft systems (UAS, otherwise known as drones), the FCC has published new rules applicable to the operation of UAS in the 5 GHz spectrum band.

The post FCC Sets Initial Rules for Drone Operations in the 5 GHz Band appeared first on In Compliance Magazine.

Ken Wyatt provides an overview of radiated emissions pre-compliance testing. He covers equipment setup, field strength calculations, and strategies for managing ambient interference. The guide aims to enhance EMC troubleshooting skills and reduce formal testing expenses.

The post EMC Bench Notes: Pre-Compliance Testing for Radiated Emissions, Part 2 – Making the Measurement appeared first on In Compliance Magazine.

The U.S. Food and Drug Administration has updated its list of authorized medical devices that incorporate augmented reality (AR) and virtual reality (VR) technologies.

The post List of Medical Devices Incorporating Virtual Reality Technology Updated appeared first on In Compliance Magazine.

The FCC is taking steps to ensure that those with disabilities are able to take full advantage of the benefits of videoconferencing technologies.

The post FCC to Vote on Rules to Improve Access to Video Conferencing appeared first on In Compliance Magazine.

Patrick André discusses the misconception of "ground" in electrical engineering. He explains the difference between true ground and power/signal returns, emphasizing the importance of proper return line treatment in circuit design. André highlights how this understanding impacts EMC performance and system design across various applications.

The post Military and Aerospace EMC: Grounds and Returns appeared first on In Compliance Magazine.

As part of a broader effort to expand health outcomes across diverse populations in the U.S., the U.S. Food and Drug Administration (FDA) has published a Discussion Paper to facilitate a public discussion on how to advance health equity in connection with medical devices.

The post FDA Releases Paper on Health Equity for Medical Devices appeared first on In Compliance Magazine.

The U.S. Federal Communications Commission is seeking comment on a wide range of changes to its rules applicable to frequency bands used by the Citizens Broadband Radio Service.

The post FCC Seeks Comments on Proposed Rules for 3.55-3.7 GHz Band Operations appeared first on In Compliance Magazine.

This article discusses the risks of electrostatic discharge (ESD) in healthcare settings and the new ESDA TR29 guidance document. It outlines causes of ESD, potential hazards like equipment malfunction and data loss, and preventive measures such as static control flooring, proper grounding, and humidity control. The article also describes recommended ESD control programs for healthcare facilities.

The post Evaluating the Latest Strategies for Electrostatic Hazard Mitigation in Medical Environments appeared first on In Compliance Magazine.

This series of articles delves into the design principles of power filters for switched-mode power converters and similar applications, focusing on conducted and radiated emissions. Part 1 provides an overview of filter design principles, emphasizing the need for specialized approaches to meet EMC specifications in an increasingly electrified and sustainable world.

The post Filter Designs for Switched Power Converters − Part 1: Overview appeared first on In Compliance Magazine.

A Charged Device Model (CDM) simulation method has been demonstrated to predict CDM fail current of receiving circuits with gate oxide connected to pad. This method involves inclusion of 20ps rise time edge into the stimulus. It was shown previously that this fast rise time component of the pulse can cause the gate oxide damage. The simulation method is intended as a schematic-level tool during pre-silicon design phase to deliver CDM ESD protection. Simulation results are verified by silicon results with qualification CDM test on package and Transmission-Line-Pulse (TLP) measurements on wafer-level.

The post Advanced CDM Simulation Methodology for High-Speed Interface Design appeared first on In Compliance Magazine.

This article explains how to use a Smith Chart to determine the voltage standing wave ratio (VSWR).

The post Smith Chart and Voltage Standing Wave Ratio appeared first on In Compliance Magazine.

Standards continuously evolve, and EOS/ESD Association, Inc. standards are no different. The ESDA is always striving to achieve the highest quality standards.

The post What’s New in ESD Control Standards? appeared first on In Compliance Magazine.

This blog by Don MacArthur discusses how to measure creepage and clearance distances on printed circuit boards (PCBs) to ensure safety. It covers definitions, design guidelines, measurement techniques, and tips for compliance engineering in electrical product safety.

The post How to Measure Spacings on a Printed Circuit Board to Ensure Safety appeared first on In Compliance Magazine.

On a bright note, a teacher at a high school in Staten Island, NY is helping to train the next generation of America’s amateur radio operators!

The post NY High School Helps Train Next-Gen Amateur Radio Operators appeared first on In Compliance Magazine.

The Enforcement Bureau of the FCC has reached a settlement with a telecommunications provider in connection with charges that the company transmitted illegal, AI-generated robocalls.

The post FCC Reaches Settlement with Transmitter of Spoofed Election Calls appeared first on In Compliance Magazine.