EMC/EMI

Product Insights: Why Do Ferrites Never Seem to Work When We Need Them To?

In Compliance Magazine -

Ferrite beads may fail to suppress RF emissions due to misidentified noise sources, high circuit impedance, outdated advice, or incorrect ferrite selection. Careful analysis and appropriate application are crucial for effective EMC compliance.

The post Product Insights: Why Do Ferrites Never Seem to Work When We Need Them To? appeared first on In Compliance Magazine.

EMC Bench Notes: Pre-Compliance Testing for Radiated Emissions, Part 3 – Making the Measurement for MIL and Automotive

In Compliance Magazine -

Discover pre-compliance testing for automotive and military EMC standards. Learn key differences from commercial testing, setup techniques, and tips for dealing with ambient signals. Save thousands in wasted compliance testing.

The post EMC Bench Notes: Pre-Compliance Testing for Radiated Emissions, Part 3 – Making the Measurement for MIL and Automotive appeared first on In Compliance Magazine.

Testing to UNECE Regulation 100 Requirements for Electric Vehicle Batteries

In Compliance Magazine -

This article discusses Revision 3 of UNECE Regulation No. 100, which introduces new safety requirements for rechargeable energy storage systems in electric vehicles, including updated tests and standards for battery packs and thermal propagation protection.

The post Testing to UNECE Regulation 100 Requirements for Electric Vehicle Batteries appeared first on In Compliance Magazine.

Update on the Revision of IEEE Std 1720™

In Compliance Magazine -

This article discusses the ongoing revision of IEEE Standard 1720, which provides recommended practices for near-field antenna measurements. It outlines the update process, key changes in various clauses, and new additions to the standard, including improved guidance on anechoic chamber design and non-regular scanning techniques. The revised standard is expected to be published in early 2025.

The post Update on the Revision of IEEE Std 1720™ appeared first on In Compliance Magazine.

Evaluation of Automotive Electronics Product Development Process and Implementation of In-House EMC Development Testing Facility

In Compliance Magazine -

This article discusses improving automotive electronics development processes, emphasizing early testing and in-house EMC capabilities. It highlights current limitations, suggests efficiency enhancements, and provides practical advice for implementing cost-effective EMC testing setups, drawing on the author's extensive industry experience.

The post Evaluation of Automotive Electronics Product Development Process and Implementation of In-House EMC Development Testing Facility appeared first on In Compliance Magazine.

Are ESD & ESA Controls in place in Semiconductor Wafer Fabs?

In Compliance Magazine -

This text discusses ESD/ESA control in semiconductor fabs, highlighting challenges with S20.20 certification, the importance of grounding conductive materials, managing insulative materials, and using ionization for charge neutralization in wafer manufacturing processes.

The post Are ESD & ESA Controls in place in Semiconductor Wafer Fabs? appeared first on In Compliance Magazine.

Implementing “Wordless” Safety Labels

In Compliance Magazine -

This column discusses "wordless" safety labels, which use symbols and hazard severity panels without text. It explores their benefits, limitations, and implementation considerations, emphasizing the importance of balancing complete information with clear communication in product safety warnings.

The post Implementing “Wordless” Safety Labels appeared first on In Compliance Magazine.

Practical Engineering: How to Become a Great Compliance Engineering Professional

In Compliance Magazine -

Don MacArthur's blog outlines key steps to excel in compliance engineering, including mastering regulations, staying updated, gaining experience, developing problem-solving skills, and maintaining ethical conduct. He emphasizes continuous learning and effective communication across teams.

The post Practical Engineering: How to Become a Great Compliance Engineering Professional appeared first on In Compliance Magazine.

FDA Drafts Guidance on Chemical Analysis for Medical Device Biocompatibility

In Compliance Magazine -

The FDA released draft guidance on chemical analysis for medical device biocompatibility assessment. This approach can reduce testing time and animal testing. Public comments are accepted until November 19th through the Federal Rulemaking Portal.

The post FDA Drafts Guidance on Chemical Analysis for Medical Device Biocompatibility appeared first on In Compliance Magazine.

Spectrum Analyzer Measurements

In Compliance Magazine -

Don MacArthur explains spectrum analyzers, tools for frequency domain analysis of signals. He covers their functionality, key parameters (center/span, reference level, RBW, VBW), types, and usage. MacArthur emphasizes their importance in electronic measurements and provides tips for preventing damage to the devices. 

The post Spectrum Analyzer Measurements appeared first on In Compliance Magazine.

EMC Bench Notes: Pre-Compliance Testing for Radiated Emissions, Part 2 – Making the Measurement

In Compliance Magazine -

Ken Wyatt provides an overview of radiated emissions pre-compliance testing. He covers equipment setup, field strength calculations, and strategies for managing ambient interference. The guide aims to enhance EMC troubleshooting skills and reduce formal testing expenses.

The post EMC Bench Notes: Pre-Compliance Testing for Radiated Emissions, Part 2 – Making the Measurement appeared first on In Compliance Magazine.

Pages

Subscribe to www.rfmentor.com aggregator - EMC/EMI